Motorola Using the Baby Monitor MBP35BL, MBP35BW, Setting up, Night vision, Talk function

3.Using the Baby Monitor MBP35BL, MBP35BW

3.1Setting up

•Place the camera in a convenient location and point the lens of the camera towards the area you want to monitor.

•Tilt the head of the baby unit up or down to your desired position until the parent unit gets a good reception of the baby.

NOTE

Do not place the camera within baby’s reach! If there is interference on the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment.

3.2Night vision

The camera has 4 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor detects a low level of ambient light, the LEDs will automatically activate and the screen on the parent unit will display in black and white.

NOTE

If the ambient light near the Baby Unit is marginal, the screen may appear to flicker between colour and black and white.

3.3Talk function

Press and hold ton the Parent unit to talk to your baby through the

Baby unit loudspeaker. The symbol will be displayed in the middle of the LCD screen.

3.4Adjusting the volume of the Parent Unit

1.Press <and >to adjust the volume (5 levels) of the Parent Unit

during normal operations, and	(5 volume levels) appears on
the display screen.

ENGLISH

Using the Baby Monitor MBP35BL, MBP35BW 11