4.4Voice Activation
If you do not want the parent unit screen to be on continually, you can set the VOX mode so that the screen only turns on if there is a sound near the baby unit. The sound detection sensitivity level (VOX) of the Baby Monitor can be adjusted. If the baby is a quiet sleeper, the sensitivity level can be increased so that only minor disturbances will cause the parent unit screen to turn back on.
1. Press mrepeatedly until VOX appears on the LCD screen.
Press <and >to adjust the VOX level to OFF, 1, 2, 3, 4 or 5 (the default setting is OFF).
When the VOX function is on (level 1 to 5), the Voice Activation ))) LED will be turned on, and the LCD screen will switch off after a few seconds if the detected sound is below the level selected.
Note: Level 5 is the most sensitive and so will need to be the quietest before the LCD will switch off.
2.Press mrepeatedly to exit.
NOTE
When the Voice Activation function is on, the voice Activation LED will be turned on (red) and the display screen will switch off after a few seconds.
The LCD screen on the parent unit will be switched back on when the sound level of the baby reaches the Voice Activation threshold or when any key on the parent unit is pressed.
14 | MBP35BL, MBP35BW Parent Unit Menu Options |
|
|
