Getting Started 1 - 9

1. Remove the stylus from its holder on the back of the MC75.
2. Carefully press and briefly hold the tip of stylus on the center of each target that appears on the screen.
3. Repeat as the target moves around the screen, then tap the screen to continue.

Checking Battery Status

To check the charge status of the main battery or backup battery in the MC75, tap Start > Settings > System tab >
Power icon to display the Power window.
To save battery power, tap the Advanced tab and set the MC75 to turn off after a specified number of minutes.
Micro Secure Digital (microSD) Card
The microSD card slot provides secondary non-volatile storage. The slot is located on the side of the MC75 (see
Figure 1-7). Refer to the documentation provided with the card for more information, and follow the man ufacturer’s
recommendations for use.
To install the microSD card:
1. Power off the MC75.
2. Remove the memory card cover on the side of the MC75 by loosening the two ca ptive screws.
Figure 1-7
Card Installation
3. Insert the card with the card contacts facing up and the cut corner on the left, until you feel a c lick.
4. Replace the memory card cover and tighten the screws.
To remove an microSD card:
1. Power off the MC75.
2. Remove the memory card cover by loosening the screws.
CAUTION Follow proper ESD precautions to avoid damaging the microSD card. Proper ESD precautions
include, but are not limited to, working on an ESD mat and ensuring that the operator is properly
grounded.