1.1Connecting to power
Follow the steps below to connect the photo frame to a power outlet to turn on the power.
1.Plug one end of the AC power adapter to the power jack on the back of the photo frame.
2.Plug the other end into a power outlet. The power of the photo frame will be turned on.
3.Place the photo frame in landscape position on a stable surface.
NOTE
Available plug types may vary depending on where you purchased this photo frame.
1.2Inserting a memory card
The photo frame is preloaded with some photos in the internal memory. On the back end of the photo frame, you can also insert a memory card or a USB flash drive containing the content you want to show on this unit.
Your Digital Photo Frame supports SD, SDHC and MMC memory cards.
To insert a memory card, push the card firmly into the memory card slot in the correct direction as indicated above.
6 | Getting started |
|
|
