1.5Replacing the remote control battery
The supplied remote control comes installed with a CR2032 lithium battery. When you need to replace the battery, follow the steps below.
1.Slide the locking tab to the right.
2.Pull out the battery holder.
3.Insert the new battery into the battery holder. The battery must be placed with the positive pole facing upwards in the illustrated position.
4.Slide the battery holder into the remote control.
WARNING
•Protect the battery from overheating or excessive moisture.
•Failure to replace the battery in the correct manner may result in damage to the battery.
•Use only the approved specified batteries.
•Properly recycle or dispose of used batteries according to local guidelines and regulations.
•Do not throw batteries into fire. This may result in an explosion.
•If the battery is completely drained or the remote control is not in use for a long time, remove the battery to prevent leakage.
8 | Getting started |
|
|
