2-1
Chapter 2
Intrinsically Safe Radio Information
2.1 FMRC Approved Equipment
Anyone intending to use a radio in a location where hazardous concentrations of flammable
materials exist (hazardous atmosphere) is advised to become familiar with the subject of intrinsic
safety and with the National Electric Code NFPA 70 (National Fire Protection Association) Article 500
(hazardous [classified] locations).
An Approval Guide, issued by Factory Mutual Research Corporation (FMRC), lists manufacturers
and the products approved by FMRC for use in such locations. FMRC has also issued a voluntary
approval standard for repair service (“Class Number 3605”).
FMRC Approval labels are attached to the radio to identify the unit as being FM Approved for
specified hazardous atmosp heres. This label specifies the hazardous Class/Division/Group along
with the part number of the battery that must be used. Depending on the design of the portable unit,
this FM label can be found on the back or the bottom of the radio ho using . The FM Approval mark is
shown below.
Radios must ship from the Motorola manufacturing facility with the Intrinsically Safe, hazardous
atmosphere capability and FM Approval labeling. Radios will not be “upgraded” or converted to
Intrinsically safe, and or labeled in the field, after it has been shipped from the manufacturing
location.
• Do not operate radio communications equipment in a hazardous
atmosphere unless it is a type especially qualified (for example,
FMRC Approved) for such use. An explosion or fire may result.
• Do not operate an FMRC Approved Prod uct in a hazardous
atmosphere if it has been physically damaged (for example,
cracked housing). An explosion or fire may result.
• Do not replace or charge batteries in a hazardous atmosphere.
Contact sparking may occur while installing or removing batteries
and cause an explosion or fire.
• Do not replace or c hange access ories in a hazard ous atmo sphere.
Contact sparking may occur while installing or removing
accessories and cause an explosion or fire.
• Turn a radio off before removing or installing a battery or
accessory.
• Do not disassemble an FMRC Approved Product un it in any way
that exposes the internal electrical circuits of the unit.
FM
APPROVED
!
W
A R N I N
G
!