Scan and Signalling Alert Tones | P110 Portable Radios |
Scan and Signalling Alert Tones
Transmit on Radios with PTT-ID
When the PTT button is depressed a side tone is heard as the unit I.D. is being transmitted. When the tone ends, start your voice message in the standard manner.
Selective Call
A 2 beep alert tone is generated whenever a Selective Call is received, the radio unsquelches and the callers message is heard.
Call Alert
A 4 beep alert tone is generated whenever a Call Alert (page) is received. The alert tone repeats until the PTT or monitor button is pressed.
Scan Activate
A 1 beep alert tone is heard whenever scan is initiated by selecting a preprogrammed rotary scan channel location.
Priority Alert Tone
A 1 beep alert tone is heard if the radio is scanning and a conversation is initiated on the priority scan channel.
Scan Talkback Tone
A medium pitched 1 beep alert tone is sounded when you rotate the channel selector knob out of the scan position after the radio has locked on a channel and reaches the last active channel within the channel scan list.
8 | March, 1996 |
