Getting Started | P110 Portable Radios |
Battery Installation or Replacement
To Install Battery
1.Align the tabs on the top of the bat- tery to the guide rails on the radio (Figure 2).
2.Press battery and radio together.
3.Slide the battery towards the top of the radio until the battery latches click into place (arrow 1).
2 |
1
Figure 1.
To Remove Battery
The basic operation needed for bat- tery removal is illustrated in Figure 2.
1.Disengage both battery latches, located on each side of the bottom of the radio (arrow 1).
2.Move battery down on guide rails about 1/2 inch (arrow 2).
3.Pull the battery away from the guide rails and remove from housing.
On page 12 there are two different methods for battery removal.
2
1
Figure 2.
NOTE
Before each removal attempt, push battery bot- tom towards top of radio to properly seat bat- tery. Figures 3 & 4 show
12 | March, 1996 |
