Motorola QA30 TTY operation, Set TTY mode, Find it Main Menu u Settings Call TTY Setup Basics

7If moving the file(s) from a folder on the memory card, select Phone, the name of a folder, or (New Folder), and press D. If you selected (New Folder), enter the folder name and press Save.

If moving the file(s) from phone memory, select the name of a folder or (New Folder) and press D.

If you selected (New Folder), enter the folder name and press Save.

8When your phone asks if you want to move the file(s), select Yes and press Dto confirm that you want to move the file(s).

Use a TSB-121 compliant cable (provided by the TTY device manufacturer) to connect the TTY device to the phone.

Set the phone volume to level 4 (middle setting) for proper operation. If you experience a high number of incorrect characters, adjust the volume as needed to minimize errors.

For optimal performance, your phone should be at least 12 inches (30 centimeters) from the TTY device. Placing the phone too close to the device may cause high error rates.

TTY operation

You can use an optional TTY device with your

phone to send and receive calls. You must plug the TTY device into the phone’s headset jack and set the phone to operate in one of three TTY modes.

set TTY mode

ùWhen you set your phone to a TTY mode, it operates in that mode whenever the TTY device is connected.

Find it: Main Menu > u Settings > Call > TTY Setup

basics 25