Motorola SB4220 manual Before You Begin, Description

Introduction

Before You Begin

Installation & Configuration Troubleshooting FAQ Glossary License

Before You Begin

Before you begin the installation, check that you received the following items with your SURFboard cable modem:

Item

Power cord

10/100Base-T Ethernet cable

USB cable

SURFboard Cable

Modem CD-ROM

Description

Connects the SURFboard cable modem to the AC electrical outlet

Connects to the Ethernet port

Connects to the USB port

Contains the User Guide and USB drivers

X

You will need 75-ohm coaxial cable (coax) with F-type connectors to connect your cable modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may need a 5-900 MHz RF splitter and two additional coaxial cables to use both the TV and the cable modem. The coaxial cable and RF splitter are available at consumer electronic stores. To connect your SB4220 to an Ethernet hub as described in “Cabling for Multiple Users” on page 33, you may need a crossover cable. Check the documentation provided with your hub.

4 SURFboard Cable Modem SB4220 Series User Guide

Home Print Exit