B
3 | Installing the Modem |
|
Connecting the SB6121
This product is for indoor use only. Do not route the Ethernet cable outside of the building. Exposure of the cables to lightning could create a safety hazard and damage the product.
1.Make sure the coaxial cable is connected to a cable outlet or splitter.
2.Connect the other end of the coaxial cable to the Cable connector on the modem.
3.Plug the power cord into the Power port on the modem.
4.Plug the other end of the power cord into an electrical wall outlet.
5.Connect the Ethernet cable to the Ethernet port on your computer.
6.Connect the other end of the Ethernet cable to the Ethernet port on the modem.
Installing the Modem • Connecting the SB6121
SB6121 DOCSIS 3.0® Cable Modem • Installation Guide | 6 |
Uncontrolled Document
