![](/images/new-backgrounds/1193802/19380225x1.webp)
Introduction Before You Begin
Installation & Configuration
Troubleshooting FAQ Glossary License
To connect a single PC running Microsoft Windows to a SURFboard VoIP cable modem, we recommend using the Installation Assistant application.
You can start the Installation Assistant from the Main Menu on the SURFboard VoIP Cable Modem
![](/images/new-backgrounds/1193802/19380225xi2.webp)
Installation and Configuration Overview
To install and configure your VoIP cable modem for a single PC running Microsoft Windows, you can use the Installation Assistant.
Otherwise, to install and configure your VoIP cable modem:
1Install the cables as described in one of:
■“Cabling and Startup for a Single User” on page 9
■“Cabling for Multiple Users” on page 39
2If you are using the USB port only, go to “Setting Up a USB Driver” on page 11. Ethernet users can skip this step.
3Configure TCP/IP and verify the IP address for your computer following one of:
■“Configuring TCP/IP” on page 22
■Your Macintosh or UNIX user manual
X
8
SURFboard® SBV4200 VoIP Cable Modem User Guide
Home Print Exit