Introduction Before You Begin

Installation & Configuration

Troubleshooting FAQ Glossary License

X

Setting Up a USB Driver in Windows 98, continued

8Select The updated driver... and click Next.

If this window is not displayed, verify that the SURFboard VoIP Cable Modem CD-ROM is properly inserted in the CD-ROM drive. If you still cannot find the correct driver file, click Cancel to cancel the installation and perform the procedure for “Removing the USB Driver from Windows 98 or Me” on page 44. Then repeat this procedure.

9After the window at bottom left is displayed, click Next.

If a window with the message Copying Files... displays and asks for your CD-ROM drive, type your CD-ROM drive letter (for example, “D:”) and click OK.

If an Insert Disk window similar to the one below is displayed, Windows 98 system files are needed to complete the installation. To install the files, insert your Windows 98 CD-ROM is in the CD-ROM drive and click OK.

Although your SURFboard VoIP cable modem model number may be different than in the images in this guide, the procedure is the same.

14 SURFboard® SBV4200 VoIP Cable Modem User Guide

Home Print Exit

Page 19
Image 19
Motorola SBV4200 manual Select The updated driver... and click Next