NOTE: Brightness is set via the manual brightness mode and auto brightness is controlled by the radio’s photo sensor. The Home screen does not light up during a power up if the LED indicator is disabled (see Turning the LED Indicator On or Off on page 87).
A brief tone sounds, indicating that the power up test is successful.
NOTE: There is no power up tone if the radio tones/alerts function is disabled (see Turning the Radio Tones/ Alerts On or Off on page 82).
If your radio does not power up, check your battery. Make sure that it is charged and properly attached. If your radio still does not power up, contact your dealer.
To turn off the radio, press the On/Off button again and hold for 2 seconds. You see a brief Powering Down on the radio’s display.
Adjusting the Volume
To increase the volume, push the Volume Button up.
To decrease the volume, push the Volume Button down.
NOTE: Your radio can be |
|
programmed to |
|
have a minimum |
|
volume offset |
|
where the volume |
|
level cannot be | Volume |
lowered past the | Button |
programmed |
|
minimum volume. |
|
Check with your |
|
dealer or system |
|
administrator for |
|
more information. |
|
Preparing Your Radio for Use
5
English