Setting the Tone Alert Volume Offset Level
You can adjust the Tone Alert Volume Offset level if needed. This feature adjusts the volume of the tones/alerts, allowing it to be higher or lower than the voice volume.
Procedure:
1cto access the menu.
2^ or vto Utilities and press cto select.
3^ or vto Radio Settings and press cto select.
4^ or vto Tones/Alerts and press cto select.
5^ or vto Vol. Offset and press cto select.
6^ or vto the required volume value. The radio sounds a feedback tone with each corresponding volume value.
NOTE: Press cto keep the required displayed volume value.
OR
Repeat Step 6 to select another volume value.
OR
dto exit without changing the current volume offset settings.
Turning the Talk Permit Tone On or Off
You can enable and disable the Talk Permit Tone if needed.
Procedure: | Advanced | ||
| |||
1 | cto access the menu. |
| |
|
|
| |
2 | ^ or vto Utilities and press cto select. |
| |
|
|
| |
3 | ^ or vto Radio Settings and press cto select. | Features | |
4 | ^ or vto Tones/Alerts and press cto select. | ||
| |||
|
|
| |
5 | ^ or vto Talk Permit and press cto select. |
| |
|
|
| |
6 | Press cto enable Talk Permit Tone. The display shows 9 |
| |
| beside Enabled. |
|
OR
Press cto disable Talk Permit Tone. The 9 disappears from beside Enabled.
NOTE: At Step 5, you can also use <or >to change the selected option.
83
English