Almost all other settings for your radio are done using the same basic key sequence. Use your radio’s \ and [ or ] to select and set features the way you want them. All the features that work using this key sequence are described on the following pages.
Press | Display | Then Press |
|
|
|
\ | the icon representing | [ or ] to select the feature, then press M |
the feature you want | or wait ten seconds (60 seconds for Simple | |
|
| Menu mode) to save the setting or press |
|
| and hold \. |
|
|
|
Interference Eliminator Code
The interference eliminator codes help minimize interference and unwanted messages by providing you with a choice of code combinations. Refer to the Frequency and Code Charts beginning on page 46 for channel and code choices.
1.Press \ twice until the code number display begins to blink.
2.Press [ or ] to set the code, press M to save the code setting.
3.To hear everyone on your channel, select code 0.
Note: Carrier squelch (0) disables interference eliminator codes. This allows you to monitor all activity on the channel you are using.
Special Features
29
