132
News and Entertainment
The default setting for a new note is octave 5.
Note Entry Sequence
You can perform the following tasks when creating a tone:
5 base
6 increase 1 octave
7 increase 2 octaves
Action
1
Enter a sharp (
#
) before selecting the note, if
necessary. (optional)
2
Press a keypad key to select the note. (required)
3
Set the length after selecting the note. If you do
not specify a length, the default length (4) is
used.
4
Set the octave after selecting the note. If you do
not specify an octave, the default octave (5) is
used.
Task Action
insert a rest Enter 1 or more rests
(
40
characters) as needed in the
tone sequence. Set the length of
the rest (
1
to
8
) after you enter the
rest, just as you would for a note.
Octave Setting Octave