Motorola V3M manual TTY operation

established with a device, no other device can connect to your phone until the currently connected device is disconnected.

1Highlight a device in the list of devices your phone found.

2Press the center key sto connect the device.

3If the device requests permission to bond with your phone, select YES and enter the device PIN code to create a secure connection with the device.

Note: The default PIN code is 0000.

When the connection is made, the à (Bluetooth) indicator or a Bluetooth message displays in the home screen.

Tip: For specific information about an accessory, refer to the instructions that came with it.

TTY operation

You can use an optional TTY device with your phone to send and receive calls. You must plug the TTY device into the phone’s headset jack and set the phone to operate in one of three TTY modes.

Note: Use a TSB-121 compliant cable (provided by the TTY manufacturer) to connect the TTY device to your phone.

Note: Set the phone to level 4 (middle setting) for proper operation. If you experience a high number of incorrect characters, adjust the volume as needed to minimize the error rate.

Note: For optimal performance, your phone should be at least 12 inches (30 centimeters) from the TTY device. Placing the phone too close to the TTY device may cause high error rates.

34main attractions