Interface Connector Specifications
48 Module Hardware Description May 31, 2008
A Stand Alone model of the W24 is shown in Figure 4-2.
Figure 4-2: W24 Stand Alone Model
Interface Connector Specifications
The W24 uses a single 70-pin, 0.5 mm pitch, board to board connector for the host interface, as
described in Table 4 -1.
Table 4 -2 describes the cellular interface connector options.
Table 4-1:W24 host interface connector options
W24 Connector Mating Connector Stacking Height
Molex 53748-0708 Molex 52991-0708 3.0 mm
Table 4-2:W24 cellular interface connector options
W24 Connector Mating Connector Stacking Height
Molex 52991-0708 Molex 53748-0708 4.5 mm