Audio Indicators for Programmable Buttons
Some programmable buttons use audio indicators to indicate the change as they alternate between two different choices.
Programmable | Positive | Negative | |
Button | Indicator Tone | Indicator Tones | |
|
|
| |
Zone | In Zone 2 | In Zone 1 | |
|
|
| |
Repeater/ | In Talkaround | In Repeater mode | |
Talkaround | mode | ||
| |||
|
|
| |
Scan | Start Scan | Stop Scan | |
operation | operation | ||
| |||
|
|
| |
Squelch | Operating in tight | Operating in | |
squelch | normal squelch | ||
| |||
|
|
| |
Power Level | Transmitting at | Transmitting at | |
low power | high power | ||
| |||
|
|
| |
Horns and | The horns and | The horns and | |
Lights | lights feature is on | lights feature is off | |
|
|
| |
Tones and | All tones and | All tones and | |
Alerts | alerts are on | alerts are off | |
|
|
|
Selecting a Radio Channel,
Subscriber ID, or Group ID
1Select the zone by pressing the preprogrammed Zone button to switch between zones.
2Press the Channel Rocker to select the required channel, subscriber ID, or group ID.
Making a Group or Private Call
Press the preprogrammed One Touch Call button and proceed to step 2.
OR
Follow the procedure below.
1Press the Channel Rocker to select the channel with the active group ID.
OR
Press the Channel Rocker to select the channel with the active subscriber ID. 
2Press the PTT button to make the call. The green LED lights up.
3Wait for the Talk Permit Tone to finish (if enabled). Speak clearly into the microphone.
4Release the PTT button to listen.
5If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to
respond. 
OR
If there is no voice activity for a predetermined period of time, the call ends.
For a Private Call, you hear a short tone when the call ends.
Your radio must have the Privacy feature enabled on the channel to send a privacy- enabled transmission. Only target radios with the same Privacy Key as your radio will be able to unscramble the transmission.
Making an All Call
Your radio must be programmed to allow you to use this feature. Users on the channel cannot respond to an All Call.
1Press the Channel Rocker to select the channel with the active All Call group ID.
2Press the PTT button to make the call. The green LED lights up.
3Wait for the Talk Permit Tone to finish (if enabled). Speak clearly into the microphone.
4If there is no voice activity for a preprogrammed period of time, the call ends.
When you receive an All Call, you cannot use any preprogrammed button functions until the call ends.
English
