Advanced Features
18
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, do one of the following:
•Power the radio off and powering it on again, OR
•Stop and restart a scan via the programmed Scan button, OR
•Change the channel via the Channel Selector Knob.
Call Indicator Settings
You can turn on or off the ringing tones for a received Private Call (see Turning Radio Tones/Alerts On or Off on page 24).
Escalating Alarm Tone Volume
Your radio can be programmed by your dealer to continually alert you when a radio call remains unanswered. This is done by automatically increasing the alarm tone volume over time.
This feature is known as Escalert.
Call Alert Operation
Call Alert paging enables you to alert a specific radio user to call you back when they are able to do so. This feature is accessible via a programmed One Touch Call button.
Receiving and Acknowledging a Call Alert
Procedure:
When you receive a Call Alert page:
1You hear a repetitive tone. The LED blinks yellow.
2Press and release the PTT button to acknowledge the alert.
Making a Call Alert with the One Touch Call Button 
Procedure:
1Press the programmed One Touch Call button to make a Call Alert to the predefined ID.
2The LED lights up solid green when your radio is sending the Call Alert.
3If the Call Alert acknowledgement is received, two chirps sounds.
OR
If the Call Alert acknowledgement is not received, a low- pitch tone sounds.
English
