Identifying Status Indicators
8
Identifying Status Indicators
Your radio indicates its operational status through the following: LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8 Audio Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8 Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8
LED Indicator
The LED indicator shows the
operational status of your radio. | LED Indicator |
|
Blinking red – Radio is transmitting at low battery condition, receiving an emergency transmission or has failed the self- test upon powering up.
Solid yellow – Radio is monitoring a channel. Also indicates fair battery charge when the programmed Battery Strength button is pressed.
Blinking yellow – Radio is scanning for activity or receiving a Call Alert.
Solid green – Radio is transmitting. Also indicates full charge of the battery when the programmed Battery Strength button is pressed.
Blinking green – Radio is powering up, receiving a non-
Rapidly blinking green – Radio is receiving a 
NOTE: When the LED blinks green, it indicates the radio detects activity over the air. Due to the nature of the digital protocol, this activity may or may not affect the radio's programmed channel.
Upon a PTT button press, if the radio is programmed for polite operation, the radio automatically determines whether a transmission is permitted via a Talk Permit or a Talk Denial tone.
Audio Tones
Alert tones provide you with audible indications of the radio’s status or the radio’s response to data received.
Continuous Tone A monotone sound. Sounds continuously until termination.
English
