Motorola XPR 7550 manual Scan

8^ or vto Edit Priority and press cto select.

9^ or vto the required priority level and press cto select.

10The display shows positive mini notice before returning to the previous screen.

11The priority icon appears left of the member’s name.

There is no priority icon if priority is set to None.

Scan

When you start a scan, your radio cycles through the	Advanced
programmed scan list for the current channel looking for voice
activity.
The LED blinks yellow and the scan icon appears on the status
bar.
During a dual mode scan, if you are on a digital channel, and	Features
your radio locks onto an analog channel, it automatically
switches from digital mode to analog mode for the duration of
the call. This is also true for the reverse.
There are two ways of initiating scan:

•Main Channel Scan (Manual): Your radio scans all the channels/groups in your scan list. On entering scan, your radio may – depending on the settings – automatically start on the last scanned “active” channel/group or on the channel where scan was initiated.

•Auto Scan (Automatic): Your radio automatically starts scanning when you select a channel/group that has Auto Scan enabled.

NOTE: This feature is not applicable in Capacity Plus and Linked Capacity Plus.

41

English