Scanning
(XU2600 and XV2600 Only)
Scan allows you to monitor other channels. When the radio detects activity, it stops scanning and locks in on the active Channel. This allows you to talk and listen to the person transmitting without changing channels.
•To start scanning, briefly press J. Your radio displays h and begins to scroll through channels. When the radio detects Channel activity, it stops on that Channel and displays the Signal Strength Indicator and the Channel. You can talk to the person(s) transmitting without having to switch channels by pressing M.
•To stop scanning, briefly press J. If you press M while the radio is scanning,
the radio will transmit on the Channel which was selected before you activated Scan.
If no transmission occurs within five seconds, scanning will resume.
If you want to scan a Channel without Interference Eliminator Codes, change the code for your set Channel to 0before you press and release J.
Editing Scan List
Scan List is changed by pressing \ until h displays.
•The flashing Channel will appear on the display with a flashing Y or n.
•Press [ or ] to increase or decrease the Channel.
•Pressing Jwill change the Scan List to include/Y or exclude/n that particular Channel.
Features
X
15
