Slide the UNLOCK switch on the bottom of Camera and use the knob to pull the
Thread the provided Mounting Strap through the Eyelets on the back of the camera and secure to a tree or pole approximately 36" from the ground as shown.
|
|
|
| Turn Camera on by sliding ON/OFF/AIM switch to |
| ||
|
|
|
|
| |||
|
|
|
| the ON position. | Eyelet | ||
|
|
|
| ||||
|
|
|
| Press the MODE button one time to get to the |
| ||
|
|
|
|
| |||
|
|
|
| Camera Setup Menu. Set Time and Date by pressing |
| ||
|
|
|
|
| |||
|
|
|
| ENTER, using UP/DOWN to adjust selected field, |
| ||
|
|
|
| LEFT/RIGHT to move to the next field and ENTER |
| ||
|
|
|
| when done. |
| ||
|
|
|
| Press MODE button until MENU SELECTION | Mounting | ||
|
|
|
| ||||
|
|
|
| screen is displayed. Use the UP/DOWN buttons | Strap | ||
|
|
|
| ||||
|
|
|
| until the MAIN SCREEN option is highlighted |
| ||
|
|
|
| yellow. Press ENTER. |
| ||
|
|
|
| Your Camera will now automatically take pictures |
| ||
|
|
|
|
| |||
|
|
|
| whenever an animal is detected in range |
| ||
|
|
|
|
| |||
|
|
|
| the default settings below. |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Capture Mode | TRAIL CAM (Still) |
|
| Photo Quality | HIGH |
|
| Photo Delay after each photo is taken | 1 MIN |
|
| Multi Shot Count |
| |
| Digital Zoom | NO ZOOM |
|
| Video Resolution | HIGH |
|
| Video Length | 5 SEC |
|
| Video Audio | ON |
|
| Camera Name | MYCAMERA |
|
| Temperature | Fahrenheit |
|
| Info Strip printed on photos | ON |
|
| Plot Frequency | 15 SECONDS |
|
| Plot Duration | 3 HOUR |
|
| Default Setting | NO |
|
| Delete All? | NO |
|
|
|
|
|
CAPTURE MODES
The GameSpy offers four capture modes as described below. The default capture mode is Trail Cam.
TRAIL CAM MODE
Still photos are taken when an animal is detected. The number of photos taken when an animal is detected is configurable in Settings. Photos are stored in the in the DCIM/100_MDGC folder on the SD card.
PLOT CAM MODE
The camera takes photos at a specified interval during the day and combines them together to create a Plot Video (*.MLT file) which can be viewed on the supplied Moultrie Plot Stalker software. The camera takes a Plot Video twice a day; once in the morning and once in the evening. The morning Plot Video begins 30 min before sunrise. The evening Plot Video ends 30 min after sunset. See chart below as a reference. The length of each Plot Video is determined by the Plot Duration setting in the camera menu. The camera will detect the correct sunrise and sunset times automatically and adjust itself accordingly. The Plot Videos are stored in :/PLOT folder on the SD card.
IMPORTANT: It will take the camera 24hrs to properly adjust to the correct sunrise and sunset times. As a default the camera will start the morning Plot Video at 5:30am and end the evening video at 6:30pm. To reset the sunrise and sunset times back to the default times, use the Default Settings option in the menu.
{ | { |
Morning Plot Video | Evening Plot Video |
HYBRID CAM MODE
Camera operates in Plot Cam mode during the day and Trail Cam Mode during the night. Thirty minutes after dusk the camera will enter the Trail Cam mode and take night photos when the PIR sensor is triggered.
4VIDEO MODE
Camera records a video when an animal is detected by the motion sensor. During daylight hours the camera will record a video 5, 15 or 30 seconds in length. During night the camera will record a video with a maximum length of 10 seconds. The video length is configurable in SETTINGS.
M100 GameSpy Digital Camera | Page 3 | Page 4 | M100 GameSpy Digital Camera |
