Preparing your Stroller to fit the Carrycot

Before you can attach the Carrycot to your stroller you will need to remove the fabric sunhood and seat on your stroller.

Removing the Sunhood

1. Standing beside your stroller and using a reasonable degree of force, pull the sunhood support wire towards you (by about 50mm/2in).

2.Remove support wire W from sunhood bush J on the side nearest to you.

3.Unfasten sunhood domes that attach the sunhood to stroller frame and to stroller seat back.

W

J

Removing the Seat

1. Unfasten domes on seat that attach to frame.

2. Urban (Jungle) Only: unfasten strap underneath seat at point A.

3. Terrain Only: remove seat support wire from stroller frame at C and D. Push seat forward, then slide fabric off seat

support wire.

A

C D

ENGLISH

Page 5
Image 5
Mountain Buggy Carrycot manual Removing the Sunhood, Removing the Seat, Unfasten domes on seat that attach to frame