Configuration 1 Instructions (continued)
Fitting the Carrycot to the Frame
1. | Ensure snap locks are rotated so screw holes are | ✘ | |
| |||
| on top. |
|
|
2. | Open snap locks. |
|
|
3. | Place Carrycot onto Buggy frame. Confirm |
| |
| positioning as pictured below. |
| ✔ |
|
|
| |
TERRAIN | URBAN |
|
|
| X | X |
|
| Y | |
| Y | |
sunhood joint | tube joint | |
| ||
Place snap lock X directly above | Place snap lock Y directly above tube joint | |
sunhood joint | ||
|
4.Push snap locks firmly down flat, making sure you hear the lock ‘click’, indicating they are fully locked.
Fitting the Feet to the Carrycot
1.Take one foot and place provided screw through hole in narrow end of foot.
2.Screw whole unit into one of the 4 holes located on bottom of Carrycot.
3.Ensure foot is screwed tightly.
4.Repeat process for all 4 feet.
To remove: unscrew each foot from bottom of Carrycot.
ENGLISH
