Configuration 1 Instructions
›››PLEASE FOLLOW THESE INSTRUCTIONS IF YOU ARE FITTING:
a:a Single Carrycot to a Single Stroller
b:a Twin Carrycot to a Double Stroller
Fitting the Snap Locks to the Carrycot
Preparation
You will need to have all components on the parts list shown to fit Carrycot to your stroller.
Have a look at sides of Carrycot. There are three holes on each side of Carrycot to allow snap locks to be fitted. Configuration varies depending on the Mountain Buggy model you have.
•Two snap locks are fitted to each side of Carrycot. The unused hole can be fitted with the spare screw and cover button.
How to fit the Snap Locks
1.Place one snap lock over hole A. Make sure it is aligned correctly with the hole in Carrycot.
2.Using Allen key, rotate screw in snap lock in clockwise direction until screw is tight. Snap lock will still be able to rotate but is firmly attached.
3.Connect second snap lock according to model directions below.
4.Repeat on other side.
For Urban (Jungle) models
5.Fit second snap lock to position B.
6.Fit small screw and cover button to hole C.
For Terrain Models
5.Fit second snap lock to position C.
6.Fit small screw and cover button to hole B.
PARTS LIST
Carrycot
4 x snap locks
Allen key
2 x screws
2 x cover buttons
A
URBAN
A
C
B 
TERRAIN
AC B 
