Moxa Technologies C218 user manual Windows 95/98, Removing Driver

Removing Driver

To remove the driver for the Intellio C218Turbo/PCI board,

1.Open the [Control Panel], click on the [Network] icon and select the [Adapters] tab.

2.Select “MOXA Intellio C218Turbo Adapter” in the adapter list, then click on the [Remove] button and the [OK] button to remove the driver.

3.Restart the system to activate the new configuration.

Windows 95/98

Windows 95/98 supports up to 128 serial ports, from COM1 to COM128. To fully integrate the advanced features of Windows 95, multi-process and multi-thread, pure 32-bit Windows 95 virtual device port drivers (VxD) compliant with communication driver (VCOMM) are developed for C218 Turbo/PCI and other MOXA multiport boards. The drivers conform to Win32 COMM API standard.

If you are the first time installer or you want to install more boards, please go directly to the section “Installing Driver”.

If you already have installed the driver and want to re-configure the board, please refer to the section “Configuring Board and Port”.

If you want to upgrade or even remove driver, please go to the section “Updating Driver” and section “Removing Driver”.

If you want to remove boards, please simply unplug the undesired boards from the system.

3-10Intellio C218Turbo /PCI User's Manual