Moxa Technologies CP-114 Series user manual Configuring Board and Port

Software Installation

Configuring Board and Port

If you already have installed the driver and want to re-configure the COM number for the ports under Windows 95/98, follow this procedure.

1.Open the [Control Panel], click on the [System] icon, select the [Device Manager] tab, and then [MOXA Smartio/Industio multiport board]. Select the desired [CP-114 Series] entry, click on the [Properties] button and select the [Ports Configuration] tab.

#

2.Assign the desired COM number for the Industio CP-114 Series port mapping or FIFO settings, detailed in the stage, “Port Configuration Stage”, of the previous section, “Installing Driver”.

3.Restart the system to activate the latest configuration.

Industio CP-114 User's Manual 3-13