C
OMMAND
L
INE
I
NTERFACE
3-8
enable command, followed by the privileged level password
“super” (page 3-29).
To enter Privileged Exec mode, enter the following commands and
passwords:
Configuration Commands
Configuration commands are privileged level commands used to
modify switch settings. These commands modify the running
configuration only and are not saved when the switch is rebooted.
To store the running configuration in nonvolatile storage, use the
copy running-config startup-config command.
The configuration commands are organized into four different
modes:
• Global Configuration - These commands modify the system
level configuration, and include commands such as hostname
and snmp-server community.
Username: admin
Password: [admin login password]
CLI session with the TigerSwitch 10/100 - 6724L2 Managed 24+2
Standalone Switch is opened.
To end the CLI session, enter [Exit].
Console#
Username: guest
Password: [system login password]
CLI session with the TigerSwitch 10/100 - 6724L2 Managed 24+2
Standalone Switch is opened.
To end the CLI session, enter [Exit].
Console#enable
Password: [privileged level password if so configured]
Console#