SMC Networks 10/100 manual Dot1x timeout tx-period

COMMAND LINE INTERFACE

Example

Console(config)#dot1x timeout re-authperiod 300

Console(config)#

dot1x timeout tx-period

Sets the time period during an authentication session that the switch waits before re-transmitting an EAP packet. Use the no form to reset to the default value.

Syntax

dot1x timeout tx-period seconds no dot1x timeout tx-period

seconds - Number of seconds. (Range: 1-65535 seconds)

Default

30 seconds

Command Mode

Global Configuration

Example

Console(config)#dot1x timeout tx-period 300

Console(config)#

3-50