IGMP SNOOPING COMMANDS
show mac-address-table multicast
Use this command to show known multicast addresses.
Syntax
show
•
•user - Display only the
•
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Member types displayed include IGMP or USER, depending on selected options.
Example
The following shows the multicast entries learned through IGMP snooping for bridge group 1, VLAN 1:
Console#show | |||
VLAN M'cast | IP addr. Member ports | Type | |
1 | 224.1.2.3 | Eth1/11 | IGMP |
Console# |
|
|
|
|
|
|
|
