SMC Networks 10/100 manual Igmp

COMMAND GROUPS

Command	Description	Page
Group
RADIUS Client	Configures RADIUS client-server authentication for	3-38
	logon access
Port	Configures IEEE 802.1x port access control	3-44
Authentication
SNMP	Activates authentication failure traps; configures	3-54
	community access strings, and trap managers
IGMP	Configures IGMP multicast filtering, querier	3-61
Snooping	eligibility, query parameters, and specifies ports
	attached to a multicast router
Line	Sets communication parameters for the serial port	3-68
	and Telnet, including baud rate and console
	time-out
IP	Configures the IP address and gateway for	3-79
	management access, displays the default gateway,
	or pings a specified device
HOL Blocking	Enables head-of-line (HOL) Blocking Prevention	3-86
Prevention	on the switch
Interface	Configures the connection parameters for all	3-88
	Ethernet ports, aggregated links, and VLANs
Rate Limiting	Sets the maximum rate for traffic transmitted or	3-104
	received on an interface
Address Table	Configures the address table for filtering specified	3-106
	addresses, displaying current entries, clearing the
	table, or setting the aging time
Spanning Tree	Configures Spanning Tree settings for the switch	3-111
VLAN	Configures VLAN settings, defines port	3-121
	membership for VLAN groups
PVLAN	Enables or configures private VLANs	3-132
GVRP and	Configures GVRP settings that permit automatic	3-140
Bridge Extensi	VLAN learning; shows the configuration for bridge
on	extension MIB
Priority	Sets port priority for untagged frames, also sets the	3-146
	service weight for each priority queue based on
	strict priority or Weighted Round Robin

3-11