COMMAND LINE INTERFACE

password to change the command mode from Normal Exec to Privileged Exec with the enable command (page 3-13).

The encrypted password is required for compatibility with legacy password settings (i.e., plain text or encrypted) when reading the configuration file during system bootup or when downloading the configuration file from a TFTP server. There is no need for you to manually configure encrypted passwords.

Example

Console(config)#enable password level 15 0 admin

Console(config)#

Related Commands

enable (3-13)

ip http port

Use this command to specify the TCP port number used by the Web browser interface. Use the no form to use the default port.

Syntax

ip http port port-numberno ip http port

port-number- The TCP port to be used by the browser interface. (Range: 1-65535)

Default Setting

80

Command Mode

Global Configuration

Example

Console(config)#ip http port 769

Console(config)#

3-30

Page 172
Image 172
SMC Networks 10/100 manual Syntax Ip http port port-numberno ip http port, Default Setting Command Mode