SMC Networks 10/100 manual IP Commands, To show all lines, enter this command

IP COMMANDS

Example

To show all lines, enter this command:

Console#show line

Console configuration:

Password threshold: 3 times

Interactive timeout: Disabled

Silent time: Disabled

Baudrate: 9600

Databits: 8

Parity: none

Stopbits: 1

Vty configuration:

Password threshold: 3 times

Interactive timeout: 65535

Console#

IP Commands

There are no IP addresses assigned to this switch by default. You must manually configure a new address to manage the switch over your network. You may also need to a establish a default gateway between this device and management stations that exist on another network segment.

Command	Function	Mode	Page
ip address	Sets the IP address for this device	IC	3-80
ip dhcp restart	Submits a BOOTP or DCHP client request	PE	3-81
ip	Defines the default gateway through	GC	3-82
default-gateway	which an in-band management station can
	reach this device
show ip	Displays the IP settings for this device	PE	3-83
interface
show ip	Displays the default gateway configured	PE	3-84
redirects	for this device
ping	Sends ICMP echo request packets to	NE,	3-84
	another node on the network	PE

3-79