INTERFACE COMMANDS
switchport broadcast percent
Use this command to configure broadcast storm control. Use the no form to disable broadcast storm control.
Syntax
switchport broadcast percent level no switchport broadcast
level - Threshold level as a percentage of bandwidth. (Range: 6 or 20 percent)
Default Setting
Enabled for all ports
Six percent of bandwidth
Command Mode
Interface Configuration (Ethernet)
Command Usage
•When broadcast traffic exceeds the specified threshold, packets above that threshold are dropped.
•This command can enable or disable broadcast storm control for the selected interface.
Example
The following shows how to configure broadcast storm control at
20% on port 3:
Console(config)#interface ethernet 1/3
