SMC Networks 10/100 manual Syntax Show dot1x statistics interface interface

PORT AUTHENTICATION COMMANDS

show dot1x

Use this command to show general port authentication related settings on the switch or a specific interface.

Syntax

show dot1x [statistics] [interface interface]

interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

Command Mode

Privileged Exec

Command Usage

This command displays the following information:

•Global 802.1X Parameters – Displays the global port access control parameters that can be configured for this switch as described in the preceeding pages, including reauth-enabled (page 3-48), reauth-period (page 3-49), quiet-period (page

3-49), tx-period (page 3-50), and max-req (page 3-46). It also displays the following global parameters which are set to a fixed value, including the following items:

-supp-timeout– Supplicant timeout.

-server-timeout– Server timeout.

-reauth-max– Maximum number of reauthentication attempts.

•802.1X Port Summary – Displays the port access control parameters for each interface, including the following items:

-Status– Administrative state for port access control.

-Mode– Dot1x port control mode (page 3-47).

-Authorized– Authorization status (yes or n/a - not authorized).

3-51