PORT CONFIGURATION
Configuring Port Mirroring
You can mirror traffic from any source port to a target port for
Command Usage
•Monitor port speed should match or exceed source port speed, otherwise traffic may be dropped from the monitor port.
•All mirror sessions have to share the same destination port.
•When mirroring port traffic, the target port must be included in the same VLAN as the source port.
•The switch can only mirror one port at a time.
Command Attributes
•Mirror Sessions – Displays a list of current mirror sessions.
•Source Port – The port whose traffic will be monitored.
•Type – Allows you to select which traffic to mirror to the target port, Rx (receive), Tx (transmit), or Both.
•Target Port – The port that will “duplicate” or “mirror” the traffic on the source port.
