COMMAND LINE INTERFACE
spanning-tree priority
Use this command to configure the spanning tree priority globally for this switch. Use the no form to restore the default.
Syntax
priority - Priority of the bridge. (Range: 0 - 65535)
Default Setting
32768
Command Mode
Global Configuration
Command Usage
Bridge priority is used in selecting the root device, root port, and designated port. The device with the highest priority becomes the STA root device. However, if all devices have the same priority, the device with the lowest MAC address will then become the root device.
Example
Console(config)#
spanning-tree cost
Use this command to configure the spanning tree path cost for the specified interface. Use the no form to restore the default.
Syntax
spanning-tree cost cost no spanning-tree cost
cost - The path cost for the port. (Range:
