VLAN C
OMMANDS
3-123Related Commands
show vlan (3-131)
vlan
Use this command to configure a VLAN. Use the no form to
restore the default settings or delete a VLAN.
Syntax
vlan vlan-id [name vlan-name] media ethernet [state {active
| suspend}]
no vlan vlan-id [name | state]
•vlan-id - ID of configured VLAN. (Range: 1-4094, no leading
zeroes)
•name - Keyword to be followed by the VLAN name.
-vlan-name - ASCII string from 1 to 31 characters.
•media ethernet - Ethernet media type.
•state - Keyword to be followed by the VLAN state.
-active - VLAN is operational.
-suspend - VLAN is suspended. Suspended VLANs do not
pass packets.
Default Setting
By default only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Command Usage
•no vlan vlan-id deletes the VLAN.
•no vlan vlan-id name removes the VLAN name.
•no vlan vlan-id state returns the VLAN to the default state
(i.e., active).