C
ONFIGURING

THE

S

WITCH

2-68

Web – Click VLAN, VLAN Port Configuration or VLAN Trunk
Configuration. Fill in the required settings for each interface, click
Apply.
CLI – This example sets port 3 to accept only tagged frames,
assigns PVID 2 as the native VLAN ID, enables GVRP, sets the
GARP timers, and then sets the switchport mode to trunk.
Configuring Private VLANs
Private VLANs provide port-based security and isolation between
ports within the assigned VLAN. This switch supports two types of
private VLAN ports: promiscuous, and community ports. A
promiscuous port can communicate with all interfaces within a
private VLAN. Community ports can only communicate with other
Console(config)#interface ethernet 1/3 3-89
Console(config-if)#switchport acceptable-frame-types tagged 3-126
Console(config-if)#switchport ingress-filtering 3-127
Console(config-if)#switchport native vlan 2 3-128
Console(config-if)#switchport gvrp 3-140
Console(config-if)#garp timer join 30 3-142
Console(config-if)#garp timer leave 90 3-142
Console(config-if)#garp timer leaveall 2000 3-142
Console(config-if)#switchport mode trunk 3-125
Console(config-if)#