SYSTEM MANAGEMENT COMMANDS
Example
This example shows how the set the access level and password for a user.
Console(config)#username bob
Console(config)#username bob password 0 smith
Console(config)#
enable password
After initially logging onto the system, you should set the Privileged Exec password. Remember to record it in a safe place. Use this command to control access to the Privileged Exec level from the Normal Exec level. Use the no form to reset the default password.
Syntax
enable password [level level] {0 7} password no enable password [level level]
•level level - Level 15 for Privileged Exec. (Levels
•{0 7} - 0 means plain password, 7 means encrypted password.
•password - password for this privilege level.
(Maximum length: 8 characters plain text, 32 encrypted, case sensitive)
Default Setting
•The default is level 15.
•The default password is “super”
Command Mode
Global Configuration
Command Usage
• You cannot set a null password. You will have to enter a
