SMC Networks 10/100 manual Setting Broadcast Storm Thresholds

CONFIGURING THE SWITCH

Web – Click Port, Port Configuration or Trunk Configuration. Modify the required interface settings, and click Apply.

CLI – Select the interface, and then enter the required settings.

Console(config)#interface ethernet 1/3	3-89
Console(config-if)#description RD SW#13	3-90
Console(config-if)#shutdown	3-98
.
Console(config-if)#no shutdown	3-92
Console(config-if)#no negotiation
Console(config-if)#speed-duplex 100half	3-90
Console(config-if)#flowcontrol	3-94
.
Console(config-if)#negotiation	3-93
Console(config-if)#capabilities 100half
Console(config-if)#capabilities 100full

Console(config-if)#capabilities flowcontrol

Console(config-if)#

Setting Broadcast Storm Thresholds

Broadcast storms may occur when a device on your network is malfunctioning, or if application programs are not well designed or properly configured. If there is too much broadcast traffic on your network, performance can be severely degraded or everything can come to complete halt.

2-34