![](/images/new-backgrounds/1206802/206802163x1.webp)
CONFIGURATION PARAMETERS
Advanced Setting
To change the settings on this screen is recommended for experienced user only. It is advised to leave the parameters at the default value.
•Beacon Interval: this represents the amount of time between beacon transmissions. Before a station enters power save mode, the station needs the beacon interval to know when to wake up to receive the beacon (and learn whether there are buffered frames at the access point).
•DTIM Interval: Delivery Traffic Indication Message, indicates when the DTIM occurs. A DTIM interval is a count of the number of beacon frames that must occur before the access point sends the buffered multicast frames. For example, a DTIM interval of one means that the multicast frames are sent after each beacon frame. A DTIM interval of two indicates that multicast frames are sent after every two beacon frames, and so on. Because each beacon frame includes a field that identifies the DTIM interval, all stations know when to wake up and receive multicast frames if theyre implementing power saving.