TROUBLESHOOTING

 

Troubleshooting Chart

 

 

Symptom

Action

 

 

Management Problems

 

 

Cannot connect

• Be sure to have configured the Barricade with a

using the web

valid IP address, subnet mask, and default

browser

gateway.

 

• Check that you have a valid network connection

 

to the Barricade and that the port you are using

 

has not been disabled.

 

• Check the network cabling between the

 

management station and the Barricade.

 

 

Forgot or lost

• Press the Reset button on the rear panel (holding

the password

it down for at least five seconds) to restore the

 

factory defaults.

 

 

A-3

Page 127
Image 127
SMC Networks SMC7904WBRA2 manual Be sure to have configured the Barricade with a