C
ONFIGURATION
P
ARAMETERS
4-25

PPPoA

Parameter Description
VPI/VCI Enter the Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) supplied by your ISP.
Encapsulation Select the encapsulation used by ISP from the drop-down
menu.
QoS Class ATM QoS classes including CBR, UBR and VBR.
PCR/SCR/MBS QoS Parameters - PCR, SCR and MBS are configurable.
IP assigned by ISP Select Yes if you have a dynamic IP address. Select No if
you have a static IP address.
IP Address Enter the IP address provided by your ISP. For dynamic
IP leave this field blank.
Subnet Mask Enter the subnet mask address provided by your ISP. For
dynamic IP leave this field blank.
Connect Type Sets connection mode to Always connected,
Auto-Triggered by traffic or Manual connection. For flat
rate services use Always connected.
Idle Time (Minute) Enter the maximum idle time for the Internet connection.
After this time has been exceeded the connection will be
terminated. This setting only applies when the Connect
Type is set to Auto-Triggered by traffic.
Username Enter user name provided by your ISP.
Password Enter password provided by your ISP.