CONFIGURATION PARAMETERS
PPPoE
Parameter | Description |
VPI/VCI | Enter the Virtual Path Identifier (VPI) and Virtual |
| Circuit Identifier (VCI) supplied by your ISP. |
Encapsulation | Select the encapsulation used by ISP from the |
| |
QoS Class | ATM QoS classes including CBR, UBR and VBR. |
PCR/SCR/MBS | QoS Parameters - PCR, SCR and MBS are |
| configurable. |
IP assigned by ISP | Select Yes if you have a dynamic IP address. Select |
| No if you have a static IP address. |
IP Address | Enter the IP address provided by your ISP. For |
| dynamic IP leave this field blank. |
Subnet Mask | Enter the Subnet Mask address provided by your ISP. |
| For dynamic IP leave this field blank. |
Connect Type | Sets connection mode to Always connected, |
| |
| flat rate services use Always connected. |
Idle Time (Minute) | Enter the maximum idle time for the Internet |
| connection. After this time has been exceeded the |
| connection will be terminated. This setting only |
| applies when the Connect Type is set to |
| |
Username | Enter user name provided by your ISP. |
