CONFIGURING THE ADSL ROUTER
ADSL Settings
Select your Country and Internet Service Provider. This will automatically configure the Barricade with the correct Protocol, Encapsulation and VPI/VCI settings for your ISP.
If your Country or Internet Service Provider is not listed in this screen, you will need to manually enter the settings. Go to “ADSL Settings - Country or ISP Not Listed” on page
If your ISP uses Protocols PPPoA or PPPoE you will need to enter the username and password supplied by your ISP.
If your ISP uses Protocol RFC1483 Routed you will need to enter the IP address, Subnet Mask, Default Gateway and DNS Server address supplied by your ISP.
Click NEXT to continue.
