COMMAND LINE INTERFACE
Default Setting
Level 15
Command Mode
Normal Exec
Command Usage
•“super” is the default password required to change the command mode from Normal Exec to Privileged Exec. (To set this password, see the enable password command on page
•The “#” character is appended to the end of the prompt to indicate that the system is in privileged access mode.
Example
Console#enable
Password: [privileged level password]
Console#
Related Commands
enable password
disable
Use this command to return to Normal Exec mode from privileged mode. In normal access mode, you can only display basic information on the switch's configuration or Ethernet statistics. To gain access to all commands, you must use the privileged mode. See “Understanding Command Modes” on page
Default Setting
None
Command Mode
Privileged Exec
